Traditional freestanding baths belong to many broad categories with regard to their general shape, two other conditions of equal importance would be the kind of foot and the sort of tap fittings required. Each of these and also the main forms of traditional bath tub shape are described below. The data in the following paragraphs is all about contemporarily manufactured traditional style freestanding baths not antique baths.
Traditional bath feet usually appear in certainly one of four broad styles although the variation within those styles may be great. Plain feet, ball and claw feet, often just called claw feet have been in the sort of a talon or claw gripping onto a ball which rests on to the floor and takes the weight in the bath, lions paw feet are shaped like the paw of your lion standing on the bathroom floor and then there are various pretty much Art Deco style feet you could find over a few freestanding baths. Of such three categories the ball and claw feet appear in such wide variation that the more stylised versions are barely recognisable consequently with high of the detail gone. Plain feet are similar to the ball and claw generally shape but haven’t any detail on them.
Bath feet can be bought in various materials and finishes, surefire feet has to be painted, usually these are painted black, white or perhaps the same colour as the bathroom walls. Feet can also be found made from brass, either with a polished brass finish (which is often used with gold taps) or perhaps electroplated chrome, gold (usually called antique gold), brushed nickel or bright nickel. Its not all traditional baths have feet. Normally feet are certainly not interchangeable between baths even though they may sometimes be that specific manufacturers utilize same feet on two or more of these baths. You must never purchase a bath without the feet if you don’t already know you will get the right feet manufactured for your bath.
Its imperative that you know when you buy a traditional freestanding bath what type of taps you’ll use from it as well as what you need to attractively plumb them in Traditional freestanding baths are often called roll top baths, this means the rolling regarding many traditional design of bath. It isn’t very easy to mount a tap onto the rolling regarding a roll top bath. A conventional means to fix this was to drill the taps hole inside the side in the bath just above the overflow the taps used are shaped to come up at right angles on the water inlet so they really are in exactly the same form as being a deck mounted set of taps. These taps are known as globe taps, they often be a pair of taps, hot and cold. Globe taps are merely really used nowadays with antique certain roll top baths.
More generally currently roll top baths onto which taps may be mounted have what is called a tap platform. A tap platform is really a flattened area of the bath edge into which tap holes could be drilled and taps mounted. For baths onto which taps can not be mounted you will use either wall mounted or floor mounted taps. Note additionally that there are some contemporarily manufactured and, broadly speaking, traditionally styled baths that don’t have a roll top as a result and onto which taps could in theory be mounted anywhere around the regarding the tub.
For details about Freestanding Baths just go to this popular website.