SA-3 cylinder shape burrs are perfect for interior contour work and deburring. Due to the extreme hardness of the tungsten carbide, it can be used on considerably more demanding jobs than HSS (High-Speed Steel).
Double cut or Cross cut carbide burrs are usually used on ferrous and non-ferrous metals, soft steel, and for all non-metal materials including stone, plastics, real wood, and ceramic. Double cut burrs will leave a rather smoother finish than single cut on account of producing smaller chips as they cut away the fabric. Use for medium stock removal, deburring, finishing, and cleaning. A double-cut carbide burr is the most popular cut and can help you through most applications.
Machines Suited for:
Die Grinders and hand-held pneumatic grinders
Application:
Ferrous Materials – Iron, Steel, Stainless, Steel, Titanium, Nickel, Wrought Iron
Non-Ferrous Materials – Copper
Other Materials – Fiberglass, Plastic, Hard Rubber, Wood, Stone
Cylinder Shape burrs are ideal for interior contour work like peripheral and face milling.
Safety Tips & Techniques:
Tool speed will be determined with the material you are using your burr on. If you are experiencing chipping, you’re probably operating at too high of speed for your application. Start using a slower speed while increasing in the process unless you achieve the the best results
Apply light pressure and allow the tool do the work. Bearing documented on the tool will result in reduced tool life as well as a dull burr.
Always wear proper PPE to add (however, not restricted to) safety glasses, hearing protection, respirator, and hand protection. Keep all guards available on the machine.
Avoid experience electrical energy drills; the slower speeds may lead to chipping of one’s workpiece.
To read more about SA-3 Carbide Burrs see our new net page